The Australian/New Zealand plug can be approved by one of five state agencies. The standard plug is 10A/250V rated, but 15A and 20A models are available. Australian standard AS/NZS 3112 has been updated and as of April 3, 2005 requires the use of insulated line and neutral pins. For hospital applications, a clear plug is recommended, but not required.

Australian cable is very similar to the European cable, it is measured in cross sectional sizes, but Australia has a more stringent flammability rating. It is possible for European cable to also be approved by one of the state agencies in Australia as long as it meets the standards. Approved cable will have a file number on the cable jacket.

Refer to notes at bottom of page.

Type:
Australia-C7
Part Number
198-81
Rating
2.5A/250V
Cable Length
1.8 meters
Connector Color
C7
Color
Black
Notes
N/A
The 198-81 is a power cord used in Australia/New Zealand with 2-prong plug, H03VVH2‐F 2x0.75mm to the IEC 60320-C7 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class II Applications and can connect with any device using the IEC-60320-C8 Inlet.
Type:
Australia-C7
Part Number
198-81-2
Rating
2.5A/250V
Cable Length
2 meters
Connector Color
C7
Color
Black
Notes
N/A
The 198-81-2 is a power cord used in Australia/New Zealand with 2-prong plug, H03VVH2‐F 2x0.75mm to the IEC 60320-C7 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class II Applications and can connect with any device using the IEC-60320-C8 Inlet.
Type:
Australia-C5
Part Number
198-C5
Rating
2.5A/250V
Cable Length
1.8 meters
Connector Color
C5
Color
Black
Notes
N/A
The 198-C5 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.
Type:
Australia-C5
Part Number
198-C5-2
Rating
2.5A/250V
Cable Length
2 meters
Connector Color
C5
Color
Black
Notes
N/A
The 198-C5-2 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.
Type:
Australia-strip
Part Number
198-20
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
Strip
Color
Black
Notes
N/A
The 198-20 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications.
Type:
Australia-C13
Part Number
198-000
Rating 10A/250V
Cable Length
2.5 meters
Connector Color
C13
Color
Black
Notes
N/A
The 198-000 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Australia-C13
Part Number
1980000002*
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13
Color
Black
Notes
*Clear plug recommended for medical applications
The 1980000002 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Australia-C13
Part Number
1980000041
Rating 10A/250V
Cable Length
5 meters
Connector Color
C13
Color
Black
Notes
N/A
The 1980000041 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Australia-C13R
Part Number
198-010
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13R
Color
Black
Notes
The 198-010 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Australia-C13R
Part Number
198-010-5OR*
Rating 10A/250V
Cable Length
5 meters
Connector Color
C13R
Color
Orange
Notes
*Clear plug recommended for medical applications
The 198-010-50R is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Australia-Stripped
Part Number
198-05
Rating
15A/250V
Cable Length
2.5 meters
Connector Color
Stripped
Color
Black
Notes
The 198-05 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to ROJ and strip, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications.
Type:
Australia-C19
Part Number
198-31
Rating
15A/250V
Cable Length
2.5 meters
Connector Color
Black
Color
Black
Notes
The 198-31 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to the IEC 60320-C19 connector, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.
Type:
Australia-C19
Part Number
198-31-6.1
Rating
15A/250V
Cable Length
6.1 meters
Connector Color
Black
Color
Black
Notes
The 198-31-6.1 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to the IEC 60320-C19 connector, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.
Notes:

The 198-81 is a power cord used in Australia/New Zealand with 2-prong plug, H03VVH2‐F 2x0.75mm to the IEC 60320-C7 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class II Applications and can connect with any device using the IEC-60320-C8 Inlet.

The 198-81-2 is a power cord used in Australia/New Zealand with 2-prong plug, H03VVH2‐F 2x0.75mm to the IEC 60320-C7 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class II Applications and can connect with any device using the IEC-60320-C8 Inlet.

The 198-C5 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.

The 198-C5-2 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.

The 198-20 is a power cord used in Australia/New Zealand with 3-prong plug, H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications.

The 198-000 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 1980000002 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 1980000041 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 198-010 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 198-010-50R is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 198-05 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to ROJ and strip, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications.

The 198-31 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to the IEC 60320-C19 connector, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.

The 198-31-6.1 is a power cord used in Australia/New Zealand with 3-prong plug, H05VV-F3G1.5mm to the IEC 60320-C19 connector, is rated at 15A/250V and carries one of the State Agency Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.