Plug type CEE 7 (VII) is commonly referred to as the “Schuko”, short for “Schutzkonduktor”, translated from German to mean “safety conductor”. The standard covers both the straight and angled plugs, which are often interchangeable, as not all outlets are located at floor level in Europe.

The CEE 7 (VII) is used in Germany, Austria, Finland, Netherlands, Norway, Sweden, France, Belgium, Portugal, Spain, Greece, Turkey and much of what was the Eastern Block and will cover approximately 75% of the European requests. It is also used in other countries throughout the world.

The plug has two round pin contacts and two grounding clips on the sides of the plug body, allowing the plug to be inserted in sockets without regard to polarization. Only in France and Belgium is this plug polarized because of the permanently mounted pin in the socket which mates with the hole in the plug face.

Type:
Contl Europe-C5
Part Number
199-C5
Rating
2.5A/250V
Cable Length
1.8 meters
Connector Color
C5
Color
Black
Notes
N/A
The 199-C5 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.
Type:
Contl Europe-strip
Part Number
199-80
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
stripped
Color
Black
Notes
N/A
The 199-80 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to ROJ and strip, is rated at 10A/250V and carries the VDE Approval. This power Cord is for Class I Applications.
Type:
Contl Europe-strip
Part Number
199-05
Rating
16A/250V
Cable Length
2.5 meters
Connector Color
stripped
Color
Black
Notes
N/A
The 199-05 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm2 to ROJ and strip, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications.
Type:
Contl Europe-C13
Part Number
199-000-675
Rating
10A/250V
Cable Length
1.8 meters
Connector Color
C13
Color
Black
Notes
N/A
The 199-000-675 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13
Part Number
199-L2
Rating
10A/250V
Cable Length
2 meters
Connector Color
C13 Lock
Color
Black
Notes
N/A
The 199-L2 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 locking connector, is rated at 10A/250V and carries VDE/KEMA Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13
Part Number
199-000
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13
Color
Black
Notes
N/A
The 199-000 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13
Part Number
199-000M-GYP
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13
Color
Grey
Notes
N/A
The 199-000M-GYP is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13
Part Number
1990000002
Rating
10A/250V
Cable Length
4.6 meters
Connector Color
C13
Color
Black
Notes
N/A
The 1990000002 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13
Part Number
199-5BQF-3.0*
Rating
10A/250V
Cable Length
2.95 meters
Connector Color
C13
Color
Black
Notes
*H05BQF3G1.0mmm is recommended for medical beds in Europe
The 199-5BQF-3.0 is a power cord used in Continental Europe with Splash Proof 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05BQF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe/Korea-C13
Part Number
199-020
Rating
10A/250V
Cable Length
2.95 meters
Connector Color
C13
Color
Black
Notes

The 199-020 is a power cord used in Continental Europe and South Korea with 3-prong plug right angled plug, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries the VDE, ENEC and KC Approval. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

Type:
Contl Europe-C13R
Part Number
199-010
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13 Right
Color
Black
Notes
N/A
The 199-010 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries VDE/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C13L
Part Number
199-030
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13 Left
Color
Black
Notes
N/A
The 199-030 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 left angled connector, is rated at 10A/250V and carries VDE/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.
Type:
Contl Europe-C19
Part Number
199-30
Rating
16A/250V
Cable Length
2.5 meters
Connector
C19
Color
Black
Notes
N/A
The 199-30 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm to the IEC 60320-C19 connector, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.
Type:
Contl Europe-C19
Part Number
199-30-6.1
Rating
16A/250V
Cable Length
6.1 meters
Connector Color
C19
Color
Black
Notes
N/A
The 199-30-6.1 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm to the IEC 60320-C19 connector, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.
Type:
Stripped-C13
Part Number
199-22
Rating
10A/250V
Cable Length
2.5 meters
Connector Color
C13
Color
Black
Notes
N/A
The 199-22 is an International power cord with H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications.
Type:
Stripped-C13
Part Number
199-22-3
Rating
10A/250V
Cable Length
3 meters
Connector Color
C13
Color
Black
Notes
N/A
The 199-22-3 is an International power cord with H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications.
Notes:

The 199-C5 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to the IEC 60320-C5 connector, is rated at 2.5A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C6 Inlet.

The 199-80 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to ROJ and strip, is rated at 10A/250V and carries the VDE Approval. This power Cord is for Class I Applications.

The 199-05 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm2 to ROJ and strip, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications.

The 199-000-675 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G0.75mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-L2 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 locking connector, is rated at 10A/250V and carries VDE/KEMA Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-000 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries VDE, KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-000M-GYP is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 1990000002 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-5BQF-3.0 is a power cord used in Continental Europe with Splash Proof 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05BQF3G1.0mm to the IEC 60320-C13 connector, is rated at 10A/250V and carries KEMA/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-010 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 right angled connector, is rated at 10A/250V and carries VDE/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-030 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.0mm to the IEC 60320-C13 left angled connector, is rated at 10A/250V and carries VDE/ENEC Approvals. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C14 Inlet.

The 199-30 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm to the IEC 60320-C19 connector, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.

The 199-30-6.1 is a power cord used in Continental Europe with 2-prong plug and a hole for the male earthing pin found in the French/Belgian sockets, H05VVF3G1.5mm to the IEC 60320-C19 connector, is rated at 16A/250V and carries the VDE Approval. This power Cord is for Class I Applications and can connect with any device using the IEC-60320-C20 Inlet.

The 199-22 is an International power cord with H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications.

The 199-22-3 is an International power cord with H05VVF3G1.0mm to ROJ and strip, is rated at 10A/250V and carries the necessary Approvals. This power Cord is for Class I Applications.